Products

An upper and lower body casting (often called a split casing or split housing casting) refers to a two-piece metal enclosure manufactured by casting the top (upper) and bottom (lower) halves separately. When bolted together along a precision-machined horizontal or vertical split flange, the two halves form a pressure-tight internal cavity for rotating or stationary internal components.

A large brass lifting arm casting (or heavy-duty cast brass lever/rocker arm) is a heavy-section mechanical linkage engineered to transfer high loads, torque, or leverage in demanding machinery assemblies. Unlike small precision lever arms used in control valves or electrical switches, large brass lifting arms are heavy structural castings designed to handle heavy mechanical stress, impact, and corrosive working environments without galling or sparking.

A small brass lifting arm casting is a compact, precision-cast brass mechanical component designed to function as a lever, rocker arm, or linkage handle. It translates rotary or manual force into linear lifting motion to raise pins, valve stems, latches, or internal linkages. Brass is selected for these small mechanical arms due to its non-sparking properties, natural corrosion resistance, low friction at pivot points, and attractive finish.

Brass toggle switch parts are precision-machined or cast electrical components used in the assembly of toggle switches for industrial machinery, automotive electronics, marine equipment, and household appliances.Brass is the preferred material for these parts because of its high electrical conductivity, excellent corrosion resistance, superior wear resistance, and ease of high-speed machining.

A brass bush casting (or cast brass bushing) is a cylindrical metal sleeve produced by casting molten brass or bronze into a mold. Once cast and machined, these components serve as low-friction plain bearings, sleeve bushings, or wear guides between rotating and reciprocating shafts and machinery housings.

A terminal box and cover (frequently referred to as a terminal enclosure, connection box, or motor terminal box) is a protective housing designed to enclose electrical connections, terminal blocks, and cable terminations. It provides environmental protection against moisture, dust, and physical impact while protecting operators from electrical shock hazards.

A bonnet casting refers to the manufactured metal casting that forms the bonnet (the top cover/closure) of an industrial valve, such as a gate, globe, check, or plug valve. It attaches directly to the valve body to seal the fluid cavity, while housing internal components such as the stem, packing gland, and actuator interfaces.

Welding machine brackets and cast handles are vital hardware components used to mount, lift, and structurally support portable and industrial arc/inverter welding units. These parts are typically manufactured using metal casting processes like die-casting or sand casting to ensure high impact strength and durability under heavy-duty workshop conditions

A water pump housing is the protective outer shell—often called a casing or volute—that encloses the internal parts like the impeller. It guides the flow of water, holds the parts in place, and changes the spinning speed of the water into high pressure

A vibration damper is a device used to reduce or eliminate unwanted mechanical oscillations, noise, and kinetic energy in systems. Common types include rubber-metal engine mounts, washing machine anti-vibration pads

A brass valve is a mechanical device used to control, regulate, or direct the flow of liquids and gases within a piping system. They are widely utilized in residential plumbing, HVAC systems, and industrial applications due to their exceptional durability, high-pressure tolerance, and resistance to corrosion

A flow meter housing is the protective outer enclosure of a flow measurement device. It shields delicate internal sensors (such as electromagnetic coils, turbine rotors, or diaphragms) from harsh industrial environments, moisture, and pressure